Flag which, when set to "1", will sort the sections on the repository
listing by name. Set this flag to "0" if the order in the cgitrc file
should be preserved. Default value: "1".
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
After some back and forth with Jamie and René, it looks like the git
config semantics are going to be like this:
- gitweb.category maps to the cgit repo config key "section"
- gitweb.description maps to the cgit repo config key "desc"
- gitweb.owner maps to the cgit repo config key "owner"
- cgit.* maps to all cgit repo config keys
This option can be enabled with "enable-git-config=1", and replaces
all previous "enable-gitweb-*" config keys.
The order of operations is as follows:
- git config settings are applied in the order that they exist in
the git config file
- if the owner is not set from git config, get the owner using the
usual getpwuid call
- if the description is not set from git config, look inside the
static $path/description file
- if section-from-path=1, override whatever previous settings were
inside of git config using the section-from-path logic
- parse $path/cgitrc for local repo.* settings, that override all
previous settings
Add two options, one for doing the ordinary name sorts in a
case-insensitive manner, and another for choosing to sort repos in each
section by age instead of by name.
Some setenv() implementations (e.g. the one in OpenBSD's stdlib)
segfault if we pass a NULL value. Only set environment variables if the
corresponding settings are defined to avoid this.
Note that this is a minor behaviour change as environment variables were
supposed to be set to an empty string if a setting was undefined. Given
that this feature isn't part of any official release yet, there's no
need to worry about backwards compatibility, really. Change the
documentation accordingly.
Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
For sites that do not want to configure mime types by hand but
still want the correct mime type for 'plain' blobs, configuring
a mime type file is made possible. This is handy since such a
file is normally already provided (at least on Linux systems).
Also, this reflects the gitweb option '$mimetypes_file'
Signed-off-by: Ferry Huberts <ferry.huberts@pelagic.nl>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This is a saner alternative than hardcoding the default branch to be
"master". The add_repo() function will now check for a symbolic ref in
repo_path/HEAD. If there is a suitable one, overwrite repo->defbranch
with it. Note that you'll need to strip the newline from the file (->
len-17).
If HEAD is a symbolic link pointing directly to a branch below
refs/heads/, do a readlink() instead to find the ref name.
Signed-off-by: Julius Plenz <plenz@cis.fu-berlin.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The old default value was an abomination which never should have been
allowed to see the light of day.
This patch removes the default, which is a backwards incompatible change
with low probability of causing anyone any real trouble (a repo with
submodules, displayed by cgit using the default value of `module-link`,
is very unlikely to actually generate working links).
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The current 'repo.module-link' option is sufficient when all gitlinks
in a repository can be converted to commit links in a uniform way, but
not when different submodules/paths needs different settings.
This patch adds support for 'repo.module-link.<path>', which will be
used for linking to submodules at paths matching one such entry.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The current 'clone-prefix' setting has some known issues:
* All repos get the same 'clone-prefix' value since the setting is not
adopted during repo registration (in cgitrc, or during scan-path traversal),
but only when the setting is used.
* The generated clone-urls for a repo is a combination of 'clone-prefix', a
slash and the repo url. This doesn't work well with e.g. ssh-style urls
like 'git@example.org:repo.git', since the inserted slash will make the
repo relative to the filesystem root.
* If 'remove-suffix' is enabled, the generated clone-urls will not work for
cloning (except for http-urls to cgit itself) since they miss the '.git'
suffix.
The new 'clone-url' setting is designed to avoid the mentioned issues:
* Each repo adopts the default 'clone-url' when the repo is defined. This
allows different groups of repos to adopt different values.
* The clone-urls for a repo is generated by expanding environment variables
in a string template without inserting arbitrary characters, hence any
kind of clone-url can be generated.
* Macro expansion also eases the 'remove-suffix' pain since it's now
possible to define e.g. 'clone-url=git://foo.org/$CGIT_REPO_URL.git' for
a set of repos. A furter improvement would be to define e.g.
$CGIT_REPO_SUFFIX to '.git' for all repos which had their url prettified,
or to store the original $CGIT_REPO_URL in e.g. $CGIT_REPO_REAL_URL before
suffix removal.
Reviewed-by: Ferry Huberts <mailings@hupie.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This patch makes the generated man-page for the filer api section more
similar to the other sections. Also, the bulleted list of environment
variables wasn't rendered correctly (with asciidoc 8.5.2), without an
empty line before the first item.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
When tar.xz support was added in 0642435fed (2009-12-08: Add
.tar.xz-snapshot support), cgitrc.5 was not updated to match. This
patch fixes the issue.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
If advertising other URLs to your users, you may not want to make this
available through cgit (e.g. if you have the smart HTTP transport set up
elsewhere). Allow disabling the three magic commands that simulate the
git server, but default it to enabled.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Allow for per repo logo and logo-link; Use global logo and logo-link per
default.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Paths that start with a period ('.') are considered hidden in the Unix world.
scan_path() should arguably not recurse into these directories by default.
This patch makes it so, and introduces the "scan-hidden-path" config variable
for overriding the new default and revert to the old behaviour (scanning _all_
directories, including hidden .directories).
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Lars Hjemli <larsh@prediktor.no>
Teach CGit to print an ASCII art commit graph to the left of the commit
message, similar to 'git log --graph'. The graph adds extra lines (table
rows) to the log when needed to add/remove/shuffle edges in the graph.
When 'showmsg' is enabled, the graph is automatically padded to account
for the extra lines added by the commit message/notes.
This feature is controlled by a new config variable: "enable-commit-graph"
(disabled by default), and individual repos can control it by setting
"repo.enable-commit-graph".
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This option is used to specify a filename which needs to be present in
the repositories found during `scan-path` processing. By setting this
option to 'git-daemon-export-ok', only repositories explicitly marked
for git daemon export will be included in the cgit configuration.
Signed-off-by: Felix Hanley <felix@seconddrawer.com.au>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
When this option is enabled (which it is by default), cgit will lookup
the 'gitweb.owner' setting in each git config file found when processing
the 'scan-path' option.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
When this option is enabled, the '.git' suffix of repository directories
found while processing the 'scan-path' option will be removed.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This option specifies the location of a projectlist file as used by
gitweb - when 'scan-tree' is later specified, only the projects listed in
the projectlist file will be added.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This allows one to specify the items in the RSS feeds
Signed-off-by: Aaron Griffin <agriffin@datalogics.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Sometimes it is not feasible to generate the HTML pretty-print for large
files, especially if a source-filter is involved or binary data is to be
displayed. The "max-blob-size" config var allows to disable HTML output
for blobs bigger than X KBytes. Plain downloads are not affected.
Signed-off-by: Georg Lukas <georg@op-co.de>
A new config option side-by-side-diffs added, defaulting to 0,
meaning unidiff. Also a query option (ss) is used toggle this.
In the commit page you can switch between the two diff formats by
clicking on the link on the "commit"-row, to the right of (patch).
In the diff page you can switch by using the link at the start
of the page.
All commit-links and diff-links will remember the choice.
Signed-off-by: Ragnar Ouchterlony <ragnar@lysator.liu.se>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This option must be enabled if repo-specific cgitrc files should be
allowed to override any of the 'filter' options.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
When recursively scanning a directory tree looking for git repositories,
cgit will now parse cgitrc files found within such repositories.
The repo-specific config files can include any repo-specific options
except 'repo.url' and 'repo.path'. Also, in such config files the 'repo.'
prefix can not be used, i.e. the valid options then becomes:
* name
* clone-url
* desc
* ower
* defbranch
* snapshots
* enable-log-filecount
* enable-log-linecount
* max-stats
* module-link
* section
* about-filter
* commit-filter
* source-filter
* readme
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The 'repo.' prefix should be reserved for repo-specific options, but
the option 'repo.group' must still be honored to stay backwards
compatible.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
This makes the name of the cgitrc option more descriptive and at the
same time changes the default from "0" to "1" in an attempt to stay
backwards compatible - prior to the introduction of "source-filter"
and "linenumbers", cgit always generated linenumber links in the
tree view, but now this feature can be turned off (one might want to
do this if the source-filter performs line-wrapping etc).
While at it, the documentation is updated to match the surrounding
descriptions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Tobias Bieniek